The “+” now picks video and audio
Yesterday's “+” only took images. The picker now has Video and Audio tabs; whatever you pick is registered on the current node just like images — no edge to draw, and later changes to the source canvas don't touch this node.
Tabs follow the model: you only see the tabs for the reference types the current model actually takes, so you can't pick something that would never be used.
| Model | Reference video | Reference audio |
|---|---|---|
| Seedance 2.0 / Fast / Mini | up to 3 clips | up to 3 clips |
| Seedance 2.5 | up to 10 clips | up to 10 clips |
| Wan 3.0 | up to 5 clips | up to 5 clips |
| Wan 2.7 | up to 3 clips | — |
| MiniMax H3 | up to 3 clips | up to 3 clips |
Wired references and “+” picks share one limit; the panel price and the final charge are both computed on the merged count.
Start/end frames switch only from a clean state
Start/end-frame mode uses two images and no reference video or audio. So with video/audio references attached, or more than two images, the “Start/End” tab is still there — but tapping it tells you exactly what to remove first, instead of switching and dropping the extras. Once both frame slots are filled, the “+” hides itself.
The panel says it up front
- Pick a model that doesn't take reference audio and the audio slot is greyed out with a note that it won't be sent — you never generate with an audio clip nobody uses.
- In video edit, choosing a tier that has no matching edit model (the 4K tier, for example) shows plainly that Kling O3 Standard will generate and bill at the Standard rate.